Toshiba B-SV4D owner manual A1.2 Options, A1.3 Media, A1.3.1 Media Type

APPENDIX 1 SPECIFICATIONS

ENGLISH VERSION EO1-33061

A1.2 Options

A1.2 Options

Option Name	Type
Keyboard display unit	KB-75-QM-R
Cutter module	B-SV204-QM-R
	B-SV404-QM-R
Strip sensor	B-SV904-H-QM-R
Memory module	B-SV704-E1M-QM-R (1MB)
	B-SV704-E2M-QM-R (2MB)
	B-SV704-E3M-QM-R (3MB)
	B-SV704-E4M-QM-R (4MB)
	B-SV704-E6M-QM-R (6MB)
	B-SV704-E8M-QM-R (8MB)
External media roll hanger	B-SV904-PH-QM-R
LAN adapter	B-SV704-LAN-QQ-R
	(For AC100 to 120V)
	B-SV704-LAN-QP-R
	(For AC200 to 240V)

Description

This module is an external intelligent keyboard display unit.

A cutter unit that makes stub cuts. A cutter unit that makes normal cuts.

When attached to the front of the Media Outlet, this sensor allows the on-demand strip issue by detecting the presence or lack of a label.

A flash ROM memory PC board

When this option is attached to the printer, a media roll with an outer roll diameter exceeding 127 mm (5”) can be used.

This option enables the printer to be used in a LAN network.

NOTE:

The above options are available from your nearest TOSHIBA TEC representative or TOSHIBA TEC Head Quarters.

A1.3 Media

Please make sure that the media to be used is approved by TOSHIBA TEC. The warranties do not apply to problems caused by using media that is not approved by TOSHIBA TEC.

For information regarding TOSHIBA TEC-approved media, please contact a TOSHIBA TEC authorised representative.

A1.3.1 Media Type

This direct thermal printer is specifically designed for thermal media. The table below shows the size and shape of the media that can be used on this printer.

Label	Black Mark
h
	(on reverse side)
g
	Cut position
	e
	f
d	Feed Direction
c
	EA1- 2

Tag paper

	Black Mark
h	(on reverse side)
	g
	e
d
c