English
Display Setting
1. Press SETUP
[General Setting] menu is displayed. 2. Press to select [Display Setting],
then press .
3. Select an option, press to access.
... Display Setting...
TV |
| TV Screen | 16:9 Normal |
Video Process | Resolution | 480I/576I | |
Motion Vide... | Color Space | YCbCr422 | |
|
| HDMI Deep Color | Off |
|
| HDMI 1080P 24F | On |
Move cursor key to select menu option | SETUP | Exit | |
then use “OK” key to select | |||
|
|
4. Press / to select a setup option and press
5. Select the setting you wish to change and press OK to confirm.
-Press to return to the previous menu.
-Press SETUP to exit the menu.
[TV]
•[TV Screen]
Select the screen format according to how you want the picture to appear on the TV.
{16:9 Full} – for a disc with the aspect ratio of 4:3, the output video is stretched into 16:9 full screen.
{16:9 Normal} – for a disc with the aspect ratio of 4:3, the output video is resized vertically to match what will be seen on the display.
{4:3 Pan&Scan} – for standard TV, Display a wide picture on the entire screen and cuts off the redundant portions.
{4:3 Letterbox} – for standard TV, Display a wide picture with two black borders on the top and bottom of 4:3 screen.
•[Resolution]
Select a video output resolution that is compatible with your TV display capability.
{Auto} – Select the most suitable resolution according to the TV . {480I/576I}, {480P/576P}, {720P}, {1080I}, {1080P}
– Select a video resolution setting that is best supported by the TV. See TV manual for details.
Note:
-When resolution is set to 720p/1080i/1080p:
(1)If only CVBS connected, the resolution of CVBS video output will be set to 480i/576i automatically.
(2)If HDMI and CVBS are both connected, there will be no CVBS video output, instead, a message will be shown as follows:
Out Of Range:Check Display Resolution
•[Color Space]
Select a predefined Color space of picture.
{RGB} – select RGB Color space.
{YCbCr} – select YCbCr Color space.
{YCbCr422} – Select YCbCr422 Color space.
{Full RGB} – select Full RGB Color space.
•[HDMI Deep Color]
This feature is available only when the display device is connected by a HDMI cable, and when it supports deep Color feature.
{30 bits} – Output 30 bits Color. {36 bits} – Output 36 bits Color. {Off} – Output standard 24 bit Color.
Note:
•[HDMI 1080p 24F]
{On} – Enable 1080p 24F video resolution setting.
{Off} – Disable 1080p 24F video
resolution setting.
About HDMI 1080p 24F Notes:
If you want the 24Hz output, it should fulfill below 3 conditions:
1.TV supports the 24Hz display:
2.Player choose the 24Hz option in the setup menu;
3.Media must be the 24Hz video. Notes:
-This resolution becomes effective only when the playing
-During HDMI 1080p 24F playback, there will be no composite output.
[Video Process]
... Display Setting...
TV | Video Adjust | More... |
Video Process | Sharpness | Low |
Motion Video...
Move cursor key to select menu option | SETUP | Exit | |
then use “OK” key to select | |||
|
|
18
