Connections

Connecting to a digital amplifier/AV receiver

Route the sound from this player to other device to enhance audio output.

Connect a coaxial cable from the COAXIAL DIGITAL jack on this product to the COAXIAL jack on the device.

If your AV receiver or amplifier has an HDMI jack, you can also connect the HDMI cable to HDMI IN jack on your AV receiver or amplifier.

AV receiver / amplifier

EN

DIGITAL AUDIO INPUT

COAXIAL

digital audio coaxial cable

(not included)

Connecting to network

Your Blu-ray Disc™ player can be connected to your home network:

By connecting an Ethernet cable to the ETHERNET jack on the rear of your player and to a wired hub or router. Using a wired network provides the best performance, because the attached devices connect directly to the network and are not subject to radio frequency interference.

By connecting through the built-in wireless device and a wireless access point or router.

Connecting your player to a wired router

Connect an Ethernet cable (CAT5 or better with RJ45 connector) to the ETHERNET jack on the back of your player and to an Ethernet jack on a hub or broadband router.

Networking equipment

(modem, etc.)

LAN

LAN cable

Internet

LAN

Hub or broadband router

WANLAN

5

 

4

 

3

 

2

 

1

LAN cable

Notes:

• Do not connect a modular p h o n e c a b l e t o t h e ETHERNET jack.

When plugging or unplugging the cable, hold the connector on the end of the cable. When unplugging, do not pull on the cable. Press down the lock tab and pull the connector out of the jack.

Because there are various connection configurations, follow the instructions from your telecommunication carrier or Internet service provider.

11

Page 11
Image 11
Toshiba BDX2150KC owner manual Connecting to a digital amplifier/AV receiver, Connecting to network