27
EN
1. In the “Wireless” menu, press / to select Network
List, then press OK. A list of existing wireless networks
near the Blu-ray Disc™ player will appear (It may
take several seconds for this list to be created). For
example:
2. Press / to select the desired wireless network, and
press OK to confi rm.
a. If the Blu-ray Disc™ player is connected to an
Unencrypted Wireless Network, a menu similar to
the following will appear:
3. Press / to highlight Connect, and press OK. If the
wireless network is functioning, icon and a message
“Connection to XXX...Success” will appear on the TV.
4. Press OK to close the message. The Blu-ray Disc™
player is now connected to the network. From now on,
when you turn on the player, it will automatically connect
to the network; there is no need to repeat these steps
again.
Note: If you do not see this message, the Blu-ray Disc™
player was not able to connect to the network.
Connection to the wireles s Netwo rk whic h you I.
select
The symbols that might appear next to each listed wireless
network in the network list are as follows:
Category Icon Defi nition
Connected
When the Blu-ray Disc™
player is turned on, it will
connect to the wireless
network displaying this symbol.
Typically, this is the last
wireless network connected
before powering down.
*
Indicates that the Blu-ray
Disc™ player is currently
connected to this network.
Saved The wireless network
properties have been saved
in the Blu-ray Disc™ player’s
memory.
Wireless
Security
The wireless network data is
not encrypted.
The wireless network data
is encrypted; a ‘security key’
must be entered so that the
Blu-ray Disc™ player can
share data over the network.
The wireless network data
is encrypted; the encryption
scheme is not supported by
the Blu-ray Disc™ player.
Wireless
Protocol

a

The wireless network
supports 802.11a
b
The wireless network
supports 802.11b

g

The wireless network
supports 802.11g

n

The wireless network
supports 802.11n
The wireless router supports
the WPS standard.
Signal
Strength Strong Signal
Good Signal
Medium Signal
Weak Signal
No Signal
WiFi-me
Connect WPS Pin
Name and Password are case-sensitive
Cancel
WiFi
WiFi
Network List
WiFiWiFi-me*
Panda
dlink_media
b
WiFigNTGR 11g
b
WiFigAirport_SN
bgn
a
a
Manual
WiFi Protected Setup (WPS)
IP Settings
Network List
Wireless
Customizing the Function Settings