Toshiba B-SX4T Series, BSX4TGS20QMR A1.2 Options, A1.3 Media, A1.3.1 Media Type, Label, Tag paper

APPENDIX 1 SPECIFICATIONS	ENGLISH VERSION EO1-33034
	A1.2 Options

A1.2 Options

Option Name	Type	Description
Swing cutter module	B-4205-QM	A stop and cut swing cutter.
Rotary cutter module	B-8204-QM	Rotary cutter
Strip module	B-9904-H-QM	This allows use of on-demand (peel-off) operation or to take-up
		labels and backing paper together when using the rewind guide
		plate. To purchase the strip module, please inquire at your local
		distributor.
Ribbon saving	B-9904-R-QM	This module moves the print head up and down by using a
module		solenoid to minimise ribbon usage as far as possible.
Expansion I/O	B-7704-IO-QM	Installing this board in the printer allows connection to an
interface board		external device with the exclusive interface.
PCMCIA interface	B-9700-PCM-QM	This board enables the use of the following PCMCIA cards.
board		LAN card: 3 COM 3CCE589ET (recommended)
		ATA card: Conforming to PC card ATA standard
		Flash memory card: 1MB and 4MB cards (See Section 2.9.)
Built-in LAN	B-9700-LAN-QM	This board enables the printer to be used in a LAN network.
interface board
USB interface board	B-9700-USB-QM	Installing this board enables a connection to a PC which has a
		USB interface.

NOTE:

To purchase the optional kits, please contact the nearest authorised TOSHIBA TEC representative or TOSHIBA TEC Head Quarters.

A1.3 Media

Please make sure that the media being used is approved by TOSHIBA TEC. The warranty does not apply when a problem is caused by using media that is not approved by TOSHIBA TEC.

For information regarding TOSHIBA TEC approved media, please contact a TOSHIBA TEC authorised service representative.

A1.3.1 Media Type

Two types of media can be loaded for this thermal transfer and direct thermal printer: label or tag. The table below shows size and shape of the media available for this printer.

Stop position

Cut position

	Black Mark		Black Mark
Label	(on reverse side) Refer to	Tag paper	(on reverse side)
	NOTED3 below.

k		positionStop k
		C?	D
		Cut position
		@
		A	?
j	E
		E
	B	Feed Direction
	A
		EA1- 2