［Trigger signal specification］
(1)External trigger input
-Input level
-Polarity
-Pulse width
-Input impedance
(2)Software trigger
[Output signal specification]
(1)BUSY_OUT
-Output level
-Polarity
(2)EXPOSE_OUT
-Output level
-Polarity
［Electronic shutter specification］
(1)Normal shutter
-PRESET setting
-Absolute value setting
(2)Random trigger shutter
-Fixed mode
-Pulse width mode
[Interface specification]
(1)Interface system
(2)Transmission speed
(3)Video output
(4)Protocol
(5)Conformity Cable
(6)Cable length
(7)Recommended cable
Low level: 0 to 0.5V
High level: 2.0 to 5.0V Positive / Negative bipolar 2us (Minimum)
High impedance
Set via the Gigabit Ethernet interface
The period that input of the trigger signal is forbidden.
LVTTL
Positive
The period that this camera exposes.
LVTTL
Positive
1/100s, 1/250s, 1/500s, 1/1000s, 1/2000, 1/4000, 1/10000, 1/20000s
any value is set up in
The exposure time depends on the normal shutter speed setting. The exposure time depends on the pulse width.
Gigabit Ethernet IEEE802.3ab
depends on 7.Functions (1) Format of output image GigEVision Camera Interface Standard for Machine Vision Ver. 1.0 conformity
Twist pair (Category 5e or over)
To 100m (at the Unshielded Twist Pair (UTP) cable using) Oki Electric Cable Co., Ltd
HONDA TSUSHIN KOGYO CO., LTD
High bending resistance shielded Cat5e LAN cable
*Because above recommendation cable is high bending resistance, maximum length of cable is 40m.
*Contact your dealer / distributor for details
of recommended cable.
12 | D4153659A |
