Toshiba D-RW2SC, D-RW2SU manual Basic Audio, Audio OUT, After you have completed the connections

Make one of the following connections, depending on the capabilities of your existing equipment.

Introduction

Basic Audio

TV

R L

Audio cable (supplied)

This unit

VIDEO OUT

	VIDEO IN	COMPONENT
IN		VIDEO OUTPUT	VIDEO OUT
		S-VIDEO
			Y		L
	IN	OUT
OUT	L		L
			PB/CB
	R		R		R
ANTENNA	AUDIO IN		PR/CR AUDIO OUT	COAXIAL
	(L1)

AUDIO OUT

AUDIO OUT

Method 1	Method 2
Better picture	Best picture
	COMPONENT
	VIDEO IN
S-VIDEO IN	Y
	PB/CB
	PR/CR
S-Video cable
(commercially available)	Component Video cable
	(commercially available)
S-VIDEO
OUT	COMPONENT
	VIDEO OUTPUT
	Y
	PB/CB
	PR/CR
S-VIDEO OUT	COMPONENT VIDEO OUT

Connections Basic Setup Recording Playback

After you have completed the connections

•Switch the input selector on your TV to an appropriate external input channel (usually near channel 0). Press a button on the TV’s original remote control that selects an external input channel until the DVD recorder’s picture appears. Check your TV owner’s manual for details.

Notes

•Connect this unit directly to the TV. If the A/V cables are connected to a VCR, pictures may be distorted due to the copy protection system.

•When Progressive Scan mode is selected, no video signal will be output from the VIDEO OUT or S-VIDEO OUT jack.

•This unit is compatible with the Progressive Scan System. The feature provides you with the higher definition images than the traditional output system does. To utilize this feature, you must set Progressive Scan mode to “ON”.

To set progressive scan mode, refer to page 141.

Editing Function Setup Others

EN 25

Connection_UD.indd 25 2006/01/11 16:27:50