Toshiba DR430 Will be displayed for 5 seconds, Refer to Guide to a Title List on, Recording

BASIC RECORDING & ONE-TOUCH TIMER RECORDING

6	Press [REC I] to start recording.	Press [STOP C] to stop recording.
	“I” will be displayed for 5 seconds.	The recorded title will be included in the title list.
		(Refer to “Guide to a Title List” on page 66.)
		7 e.g.) DVD+R/DVD-RW/-R

ISP 1:53

Press [PAUSE F] to pause recording.
Press [PAUSE F]] or [REC I] again to restart				Wait for a moment		90%
recording.
					This operation may take
To set one-touch timer recording (OTR)...
					awhile to be completed.
This is a simple way to set the recording time in blocks
of 30 minutes.
Press [REC I] repeatedly until the desired recording
time (30 minutes to 8 hours) appears on the TV screen.
One-touch timer recording will start.
	I	0:30
0:30
(normal recording)			1:00

8:00 7:30

•To change the recording length during one-touch timer recording, press [REC I] repeatedly until the desired length appears.

•To cancel one-touch timer recording within the specified time, press [STOP C].

Note

•When you press [REC I], recording starts immediately and continues until the disc is full or you stop recording.

•When the unit clock has not been set, the space for a date and time of title names will be blank.

•You cannot change the recording mode during the recording pause mode.

Note for one-touch timer recording

•The remaining recording time will be displayed on the front panel display during one-touch timer recording. Press [DISPLAY] to see it on the TV screen.

•Unlike the timer recording, you can perform the following operations during one-touch timer recording.

-Turning the unit into the standby mode (One-touch timer recording will be canceled.).

-Using [REC I] or [STOP C] on the remote control.

•You cannot use the pause function during one-touch timer recording.

•When one-touch timer recording is finished and the power is turned into the standby mode, the unit will switch to the timer-standby mode automatically if a timer recording has been programmed. Press [I/yON/STANDBY] to cancel the timer-standby mode to use the unit continuously.

Disc Introduction Connections Basic Setup Management Recording Playback Editing Function Setup Others

EN 37

E7PEAUD_DR430KU_EN.indd 37

2009/12/14 18:32:34