20
Panel lock, time display, stereo/bilingual transmissions, the timer
From the FUNCTIONmenu select Panel lock
and choose Onor Off using left or right.
Panel lock disables the buttons on the television. All
buttons on the remote control can still be used.

Panel lock

1
When Panel lockis On, a reminder will appear when
the buttons on the television are pressed. If the standby
button is pressed the television will switch off and
can only be brought out of standby by using the
remote control.
FUNCTION
Teletext Auto.
Panel lock On
Auto format On
Blue screen On
Side Panel 1
MENU
Back
EXIT
Watch TV
Press downto select On or Sleep timer. Use the
number buttons to set the required time. For
example, to switch the television off in one and a
half hours enter 01:30, or press rightto
increase/decrease in steps of 10 minutes.
If setting the Sleep timer, press EXITto finish. If
setting the On timer, press downto select On
timer Position, enter the programme position
number required, then press ito put the
television into Standby. The GREEN On timer
indicator on the front of the television will now
be lit.
Any equipment connected with SCART leads must
also be put into Standby to prevent them from
being displayed when the timer switches on.
Once the On timerhas been set the television
can be switched on at any time by pressing i.
The Green On timer indicator will remain on until
the set time period as passed when the television
will go to the chosen channel. This feature can
help to avoid missing favourite programmes.
To cancel the On timer/Sleep timer, enter zero
in each position.
The television can be set to turn itself Onor Off after a
certain time.

The Timer

2
3
4
1
Press MENUand left or right to select the TIMER
menu.
TIMER
Sleep timer 01:30
On timer 00:00
On timer Position 01
MENU
Back
EXIT
Watch TV
If stereo or dual language broadcasts are transmitted the
word Stereo or Dual will appear on the screen each time
programme positions are changed, disappearing after a
few seconds. If the broadcast is not in stereo the word
Mono will appear.
Stereo… Press OI/IIto select Stereo or Mono.
Bilingual… Bilingual transmissions are rare. If they are
transmitted the word Dualwill display. Choose the
required programme number and if the word Dual
appears press OI/IIto select Dual 1, Dual 2 or Mono.

Stereo and Bilingual transmissions

The time display facility allows the current (text service)
time to be seen on the television screen.
Press 8/9whilst watching a normal television
broadcast to see a time display from the broadcaster. It
will remain on screen for about 5 seconds.

The Time Display

gg