77
Getting Started
Connecting external display devices
5.375 x 8.375 ver 2.3
Connecting a standard television, projector, or VCR/DVD player
S-video cables are not included with your computer. To
connect a device to the S-video Out port, you will need to
purchase an S-video cable.
To connect a standard television, projector, or VCR/DVD
player:
1Connect one end of the video cable to the external video
device.
Refer to the documentation provided with the device for the
location of its Video In port.
2Connect the other end of the video cable to the S-video
Out port on the back of the computer.
3Turn on the external video device.
4Set the display mode by pressing Fn + F5, or by setting the
Display Properties settings. For more information, see
“Directing the display output when you turn on the
computer” on page 78.
TECHNICAL NOTE: If you are connecting to a television, you
may need to change the display properties. Most televisions
use or support an 800 x 600 standard resolution.
NOTE