Qosmio F50 Series

2.Connect the other end of the infrared transmitter cable to a set-top box. It is placed in front of the infrared receiver window on the set-top box to allow the Full size remote controller to be used to change channels.

3.Connect the end of coaxial cable (1) to the TV antenna port of your computer. Refer to Connecting the antenna cable section in Chapter 4, Operating Basics, for details.

4.Connect the other end of the coaxial cable (1) to the Splitter Out port of a splitter.

5.Connect the end of the coaxial cable (2) to the Splitter In port of a splitter.

6.Connect the other end of the coaxial cable (2) to the Satellite Out port of a set-top box.

7.Connect the end of the CATV cable to the Satellite In port of a set-top box.8.Connect the other end of the CATV cable to the wall socket.

Wall socket

CATV cable

Infrared transmitter cable

 

Satellite In port

Set-top box

 

 

 

Satellite Out port

Coaxial cable (2)

 

 

Splitter In port

 

Splitter

Splitter Out port

Coaxial cable (1)

Figure 8-16 Connection method for the computer and set-top box

Media Center Environment SettingsActivating Media Center for the first time1.Activate Media Center.The setup screen appears. Configure settings according to your environment.

Follow the screen instructions and configure settings according to the environment used.

Changing settings

Refer to the following procedures to change settings that are already configured.

1.Activate Media Center.

2.Click in the following order: click Tasks -> settings -> TV -> Set Up TV Signal.

8-16

User’s Manual