Toshiba F50 Start, Problem, Problem, Control, Procedure, Procedure, Add Hardware, i.LINK (IEEE1394) device, HDMI monitor output function

Qosmio F50 Series

HDMI monitor output function

Problem	Procedure
No display	Try adjusting the contrast and brightness controls
	on the television.
	Press the FN + F5 hot key in order to change the
	display priority and ensure that it is not set for the
	internal display panel only.
	If you are still unable to resolve the problem,
	contact your reseller, dealer or service provider.

If you turn the computer off into Sleep Mode while the display is on TV, the computer will select either the internal LCD or an external computer CRT as the display device the next time is switched on.

i.LINK (IEEE1394) device

Problem	Procedure
i.LINK device does	Check that the cable connecting the external
not function	device to the computer is firmly attached.
	Check to ensure that power is being supplied to
	the device and that the device is turned on.
	Reinstall the drivers required for the device - this
	can be achieved by clicking Start, Control
	Panel, Hardware and Sound and then clicking
	the Add Hardware icon at the left-hand side of
	the screen and following the on-screen
	instructions.
	Restart the computer and the Windows
	operating system to re-initialize the device.
	If you are still unable to resolve the problem,
	contact your reseller, dealer or service provider.

10-24 User’s Manual