Qosmio F50 Series

Problem

Procedure

 

Some CD/DVD/DVDs

The computer’s software or hardware

run correctly, but

configuration may be causing a problem - ensure

others do not

that these configurations match the requirements

 

of the CD/DVD media (refer to the CD’s or DVD’s

 

documentation if available).

 

 

 

Check the type of CD or DVD media that you are

 

using - the drive supports the following:

 

DVD:

DVD-ROM, DVD-Video

 

CD:

CD-DA, CD-Text, Photo CD™ (single/

 

 

multi-session), CD-ROM Mode 1,

Mode 2, CD-ROM XA Mode 2 (Form1,

Form2), Enhanced CD (CD-EXTRA), Addressing Method 2

Recordable DVD: DVD-R/-R DL, DVD+R/+R DL, DVD-RW, DVD+RW, DVD-RAM

Check the region code on the DVD. It must match that on the DVD Super Multi drive. Region codes are listed in the Optical disc drives section in Chapter 2, The Grand Tour.

USB floppy diskette drive

The USB floppy diskette drive is available only as an option.

For further information, please refer to Chapter 4, Operating Basics.

Problem

Procedure

Drive does not

Check the connection between the computer and

operate

the drive to ensure that it is properly attached.

 

 

Some programs run

The computer’s software or hardware

correctly but others

configuration may be causing a problem - ensure

do not

that these configurations match your

 

requirements (refer to any relevant

 

documentation, for example that supplied with

 

any software in use, for further information).

 

 

You cannot access

Try another floppy diskette in the drive - if you are

the external floppy

able to access this disk then it indicates the

diskette drive

original disk and not the drive is probably causing

 

the problem.

 

If you are still unable to resolve the problem,

 

contact your reseller, dealer or service provider.

 

 

10-10

User’s Manual