D: Audio output
15 Press / to select “Audio”, then press OK.
SETUP MENU
Picture
Audio
Language
Ethernet
General
Digital Out SPDIF | Bitstream |
|
|
Digital Out HDMI | Auto |
|
|
Digital Direct Audio Mode | Off |
|
|
Dynamic Range Control | Auto |
|
|
Dialog Enhancement | Off |
|
|
Speaker Setting | 5.1ch |
16 When you connected an audio system to the BITSTREAM/PCM jack ( page 16): Press / to select “Digital Out SPDIF”, then press OK.
Select one of the followings according to your connection, and press OK.
Bitstream
Digital Out SPDIF |
Bitstream |
PCM |
When an AV receiver or processor equipped with
When you play a disc recorded in Dolby Digital Plus or Dolby TrueHD format, Dolby Digital sound is output. When you play a disc recorded in
PCM
When a 2ch digital stereo amplifier is connected to this player.
When you play an HD DVD or DVD video disc recorded in Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS or
When you connected an HDMI device to the HDMI OUTPUT jack ( page 15, 16):
Press / to select “Digital Out HDMI”, then press OK.
Select one of the followings according to your connection, and press OK.
Auto
Digital Out HDMI |
Auto |
PCM |
Downmixed PCM |
When an HDMI device equipped with
When you play a disc recorded in Dolby Digital Plus, Dolby TrueHD or
When you play a disc recorded in Dolby Digital or DTS format, digital audio signal (bitstream audio) is output. If a connected HDMI device does not support Dolby Digital, DTS or MPEG, sound is converted into linear PCM to output.
To output high bitrate audio, select “Auto”, then make another setting. For details, see page 34.
PCM
When an HDMI device which has multi channel input is connected to this player.
When you play an HD DVD or DVD video disc recorded in multi channel in Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS or
Downmixed PCM
When a 2ch digital stereo AV receiver or processor is connected to this player.
When you play a DVD video disc recorded in Dolby Digital, DTS, MPEG1 or MPEG2 format, sound is converted into PCM (2ch) format to output.
Note
•Setting “Auto” or “PCM” will reduce output level of multi channel sound from the ANALOG AUDIO OUTPUT jacks and the DIGITAL AUDIO OUTPUT BITSTREAM/PCM jack if you:
–view the playback picture on an HDMI TV connected to this player.
–play an HD DVD video disc of a certain type, recorded in linear PCM format.
In this case, the output level will be restored by setting to “Downmixed PCM”.
22
07.7.26 3:01:06 PM |