Connecting to audio system, Via Hdmi output | Toshiba HD-A35KU

Preparation (continued)

Step 2: Connecting to audio system

Sound can output from connected audio system.

If you made the HDMI connection between the player and a TV, this step is unnecessary. Skip to Step 3.

Via HDMI output

You can enjoy the beneﬁts of Dolby Digital Plus or Dolby TrueHD by connecting the HDMI OUTPUT jack of your player to an AV receiver with an HDMI audio input.

This connection requires selection of “Digital Out HDMI” (Step 16, page 22).

HDMI cable	HDMI cable
(not supplied)	(not supplied)
HDMI INPUT	HDMI OUTPUT	HDMI INPUT

To HDMI OUTPUT

AV amplifier

HDMI compatible device

Caution

•When you are connecting (via the HDMI OUTPUT jack) an AV decoder that does not have Dolby Digital or DTS decoding capability, be sure to set “Digital Out HDMI” ( page 22) to “PCM”

or “Downmixed PCM”. Otherwise, high volume sound may damage your hearing as well as the speakers.

Note

•You may need to adjust the HDMI audio output to match the capabilities of your AV ampliﬁer. In this case, set “Digital Out HDMI” ( page 22) to “PCM”.

Via optical digital audio output

You can listen to down-converted Dolby Digital Plus and Dolby TrueHD as well as Dolby Digital and DTS using a receiver with Dolby Digital and DTS decoding capabilities and an optical digital input.

This connection requires selection of “Digital Out SPDIF” (Step 16, page 22).

Optical digital cable (not supplied)

To DIGITAL AUDIO OUTPUT

BITSTREAM/PCM OPTICAL

DIGITAL INPUT

OPTICAL

AV amplifier

*To use the optical digital output, use an optical cable to connect this jack to an optical audio input on a device capable of processing Dolby Digital, DTS bitstream, or PCM audio.

Via 5.1ch analog audio output

This connection requires selection of “Speaker Setting” (Step 16, page 23).

Audio cable (not supplied)

	CENTER
L R	SURROUND	AV amplifier
		AV amplifier

L R FRONT

SUBWOOFER

To ANALOG AUDIO

OUTPUT 5.1CH

SURROUND

16

HD-A30KUKC_en.indd 16

07.7.26 3:01:03 PM

Image 16

Toshiba HD-A35KU, HD-A35KC owner manual Connecting to audio system, Via Hdmi output, Via optical digital audio output

Contents

HD-A35KU HD-A35KC This HD DVD player employs a Laser System ProcedureResult in hazardous radiation exposure Location of the required label Important Safety Instructions Precautions Do not use the unit when moisture condensation may occur Moisture condensation occurs during the following cases Table of contents Disc compatibility FeaturesDisc Speciﬁcation Important notes about HD DVD HD output jacksCertain system requirements Customer support Front panel Index to parts and controlsRear panel Remote control Display Accessories Remote controlSupplied accessories Loading batteries To program the remote control to operate your TV TV controlRelease TV CODE. The brand code is memorized While holding down, enter a code Resolution and connections Why Hdmi connection is most recommended?Preparation Proceed the following steps to set the player ready Connecting to a TV Via Hdmi inputVia component video input Via Video yellow input Connecting to audio system Via Hdmi outputVia optical digital audio output Via 5.1ch analog audio output LAN connection Via analog audio output Power connection Powering onWhich the player is connected to Press ON/STANDBY Setting up the player Language Time Press / to select Clock Set, then pressConﬁrm the time is correct If the time is correct, select OK by Resolution Press To select Resolution Setting, then press OKPress / to select Picture, then press OK Below, then press OK Audio output Press / to select Audio, then press OK When a 2ch stereo system is connected to this player Crossover SettingFront Left / Front Right Center / L Surround / R Surround To adjust the player’s clock via the network time protocol To select whether you access Cookies or notEthernet To set your network information Cookie Setting Network Speed Playing a disc PlayingPlayback starts If playback does not start, press Play To pause playback To stop playbackTo resume playback from the location last stopped To change playback speed To select subtitles To select the soundTo select the camera angle During playback, press Subtitle To play repeatedly To locate a positionTo check the current status Requirements for HD DVD discs/Web-enabled network content HD DVD playing options in the futureC/D buttons Cursor controls Output sound conversion table Customizing the function settings During stop, press SetupSetup Menu appears Group Setting Disc Details Settings Picture Audio Language Language code list How to select a language Ethernet General Remote Controller Sound Off Enable HdmiMaintenance Update Firmware Before calling service personnel Symptom Remedy Speciﬁcation Memo Limited One 1 Year Warranty on Parts Rental UnitsCommercial Units Your Responsibility How to Obtain Warranty Services Limited Canadian Warranty For Toshiba Brand HD DVD Players Limited Warranty for Commercial UnitsRental Units Your Responsibility How to Obtain Warranty Services Arbitration and Dispute ResolutionGeneral Provisions Information on Customer Support