Connecting the FM and AM (MW/LW) Antennas
FM Antenna Connections
A | B |
ANTENNA | ANTENNA |
75 | 75 |
FM | FM |
COAXIAL | COAXIAL |
GND | GND |
AM | AM |
LOOP | LOOP |
ANTENNA | FM Antenna |
| FM 75 |
| COAXIAL |
| GND |
AM | Outdoor FM Antenna |
| |
LOOP | AM |
| |
| EXT |
English
AUsing the Supplied FM Antenna
The FM antenna provided can be connected to the FM 75- ohm COAXIAL terminal as temporary measure.
BUsing the Standard Type Connector (Not Supplied) A standard type connector (IEC or DIN45325) should be connected to the FM
Note: Make sure the antenna conductors do not touch any other terminals, connecting cords or power cord. This could cause poor reception.
Extend the supplied FM antenna horizontally.
If reception is poor, connect an outdoor FM antenna.
Before attaching a
AM (MW/LW) Antenna Connections
ANTENNA
FM 75
COAXIAL
AM (MW/LW) Loop Antenna
GND |
AM |
LOOP |
AM |
EXT |
Turn the loop until you have the best reception.
Snap the tabs on the loop into the slots of the base to assemble the AM (MW/LW) loop.
1 | 2 | 3 |
|
|
|
| If reception is poor, connect an outdoor single vinyl- |
|
|
| covered wire to the AM EXT terminal. (Keep the AM |
| AM (MW/LW) Wire Antenna | (MW/LW) loop antenna connected.) |
Note :
Make sure the antenna conductors do not touch any other terminals, connecting cords and power cord. This could cause poor reception.
Page 4