Network Settings
Wired network connection failed.
MAC Address | XX:XX:XX:XX:XX:XX | |||
IP Address | 0. | 0. | 0. | 0 |
Subnet Mask | 0. | 0. | 0. | 0 |
Gateway | 0. | 0. | 0. | 0 |
DNS Server | 0. | 0. | 0. | 0 |
IP auto setting failed. Try the following to set up the IP automatically, or set up the IP manually by selecting IP Settings.
-Ensure that the DHCP server is enabled on the wireless network, then unplug and plug the wireless network in again.
-Contact your internet service provider for more info.
Wireless - Automatic
Follow the Steps 1 to 3 in "Configuring Your Network Connection". (See page 20)
1.In the Network Settings screen, change Network Type to Wireless. The product searches for and then displays a list of the available networks.
Network Settings
Change Network | IP Settings | Retry | Close |
| a Previous | d Skip | < Move " Select |
2. | Use the ◄► buttons to select IP Settings, |
| and then press the E button. The IP Settings |
3. | screen appears. |
Select the IP setting field, and then set it to | |
| Enter manually. |
Select your network type.
Network Type | Wireless |
Wireless network
MIC
KIMING_VTOWER
You can connect your BD Home Theater to the internet. Please select which wireless network to use
Settings
4. | Select a parameter to enter (IP Address, for |
| example), and then press E. Use the number |
| keypad on your remote control to enter the |
| numbers for the parameter. You can also enter |
| numbers using the ▲▼ buttons. Use the ◄► |
| buttons on the remote control to move from |
| entry field to entry field within a parameter. When |
5. | done with one parameter, press the E button. |
Press the ▲ or ▼ button to move to another | |
| parameter, and then enter the numbers for that |
6. | parameter following the instructions in Step 4. |
Repeat Steps 4 and 5 until you have filled in all | |
| parameters. |
✎You can get the network parameter values from your Internet provider.
7.When finished entering all the parameter values, select Return ('), and then press the E button. The home cinema verifies the network connection and then connects to the network.
Wireless Network
You can set up a wireless network connection in three ways:
-Wireless Automatic
-Wireless Manual
-WPS(PBC)
Before you configure the wireless network connection, disconnect any wireless network devices currently connected to the product or, if applicable, the product's current wired connection.
WPS(PBC) Search
m Move " Select ' Return
2.Select the desired network, and then press the E button.
3.On the Security screen, enter your network's security code or pass phrase.
Enter numbers directly using the number buttons on your remote control. Enter letters by selecting a letter with ▲▼◄► buttons, and then pressing E button.
4.When finished, select Done, and then press the E button. The product verifies the network connection and then connects to the network.
✎You should be able to find the security code or pass phrase on one of the set up screens you used to set up your router or modem.
Wireless - Manual
If you have a static IP address or the Automatic procedure does not work, you'll need to set the Network Settings values manually.
Follow the Steps 1 to 3 in "Configuring Your Network Connection". (See page 20)
1.In the Network Settings screen, change Network Type to Wireless. The product searches for and then displays a list of the available networks.
2.Scroll through the list, select the desired network or Add Network, and then press the E button.
3.If you selected a network in Step 2, go to Step 6. If you selected Add Network, go to Step 4.
