Appendix
Additional Information
Notes
Connections
HDMI OUT
•Certain HDMI output resolutions may not work, depending on your TV.
•You must have an HDMI connection to enjoy videos with 3D technology.
•A long HDMI cable may cause screen noise. If this occurs, set HDMI Deep Colour to Off in the menu.
Settings
3D Settings
•For some 3D discs, to stop a movie during 3D playback, press the 5 button once. The movie stops and the 3D mode option is
•Depending on the content and the position of the picture on your TV screen, you may see vertical black bars on the left side, right side, or both sides.
TV Aspect Ratio
•Depending on the disc type, some aspect ratios may not be available.
•If you select an aspect ratio and option which is different than the aspect ratio of your TV screen, the picture might appear to be distorted.
•If you select 16:9 Original, your TV may display 4:3 Pillarbox (black bars on the sides of the picture).
BD Wise (Samsung Products only)
•When BD Wise is on, the Resolution setting automatically defaults to BD Wise and BD Wise appears in the Resolution menu.
•If the product is connected to a device that does not support BD Wise, you cannot use the BD Wise function.
•For proper operation of BD Wise, set the BD Wise option in both the product and the TV to On.
Digital Output
•Be sure to select the correct Digital Output or you will hear no sound or just loud noise.
•If the HDMI device (AV receiver, TV) is not compatible with compressed formats (Dolby Digital, DTS), the audio signal outputs as PCM.
•Regular DVDs do not have BONUSVIEW audio and Navigation Sound Effects.
•Some
•This Digital Output setup does not affect the analogue (L/R) audio or HDMI audio output to your TV.
It affects the optical and HDMI audio output when your product is connected to an AV receiver.
•If you play MPEG audio soundtracks, the audio signal outputs as PCM regardless of your Digital Output selections (PCM or Bitstream).
•Digital Output can be activated when Speaker Selection is set to TV Speaker.
•The Internet connection may be restricted while you are using
Anynet+
•Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual of your TV.
•This function is not available if the HDMI cable does not support CEC.
•If your Samsung TV has an Anynet+ logo, then it supports the Anynet+ function.
BD Data Management
•In the external memory mode, disc playback may be stopped if you disconnect the USB device in the middle of playback.
•Only those USB devices formatted in the FAT file system (DOS 8.3 volume label) are supported.
We recommend you use USB devices that support the USB 2.0 protocol with 4 MB/sec or faster read/ write speeds.
•The Resume Play function may not work after you format the storage device.
•The total memory available to BD Data Management may differ, depending on conditions.
DivX® Video On Demand
•For more information about DivX(R) VOD, visit “http://vod.divx.com”.
