Samsung HT-H5550K/SJ Using the Special Effects Remote Control Buttons, NFC tagging for Bluetooth

✎The NFC function is built into Android devices running Android OS 4.1 Jellybean or later.

-If your device is running an Android OS earlier than Android OS 4.1 Jellybean, you must download the 'Samsung NFC Connection' application from Android market to use the NFC function.

✎The position of the NFC antenna differs on smart phones. Check where the NFC antenna is located before connecting. Refer to the user manual

of your mobile phone to check the antenna’s location before making the connection.

✎If your smart phone is covered with a thick case, the connection may not succeed.

✎NFC connection works even when the Home Cinema is turned off, if Quick start is set to On. However, NFC connection will work only after the Home Cinema is turned on if the power cord had been disconnected and reconnected.

✎ The	is a trademark or
registered trademark of NFC		Note2
Forum, Inc. in the United States
and in other countries.		S3/S4
✎ NFC tagging for Bluetooth
connection cannot be established		Note3
while powering on and off.

✎ NFC tagging for Bluetooth connection will not work while the battery indicator is blinking.

Using the Special Effects Remote

Control Buttons

TV SOUND

TV SOUND

If you have a TV that supports Anynet+ (HDMI- CEC), the TV SOUND button lets you direct the TV's audio to the Home Cinema Speakers or the TV Speakers. To use, follow these steps:

1.Connect an HDMI cable to the TV and home cinema. (See page 13)

2.Set Anynet+ (HDMI-CEC) On in the home cinema and TV.

3.Press the TV SOUND button on the remote control. TV SOUND ON flashes on the display on the front panel, and then changes to D. IN.

•When TV SOUND is on, TV audio outputs through the Home Cinema speakers.

4.Press the TV SOUND button again to turn TV SOUND off.

•When TV SOUND is off, TV audio outputs through the speakers of the connected Anynet+ TV.

Use TV SOUND:

1)When you want to listen to the TV's audio through the home cinema speakers.

2)When you want to listen to the audio from a USB device plugged into the TV through the home cinema speakers.

TV SOUND ON/OFF support specifications:

Anynet+	TV Sound ON	TV Sound OFF
(HDMI-CEC)
Setting
	HTS Speaker	HTS Speaker
ON	Output		Mute
	TV Speaker	TV Speaker
	Mute		Output
	HTS Speaker	HTS Speaker
OFF	Output		Mute
	TV Speaker	TV Speaker
	Output		Output
	HTS Speaker	HTS Speaker
No Operation	Output		Mute
	TV Speaker	TV Speaker
	Output		Output
DSP/EQ			DSP/EQ

You can enjoy various sound mode.

DSPOFF : Select for normal listening.

CINEMA : Reproduces realistic and powerful sound for movie sources.

MUSIC : Suitable for whole music sources.

GAME : Suited for playing video games and produces powerful sound.

M-STEREO (Multi Stereo) : Produces surround sound for 2 channel input sources.

POWER BASS : Reinforce bass sound effect.

LOUD : Improves bass sound characteristics according to output level.

NIGHT : Optimizes to night by compress dynamic range (soft sound).

LOCAL EQ : It provides a unique EQ curve for fitting to local music.

Playing Content

35 - English