English
Selecting the Front Speakers
When you have connected two sets of front speakers, you can select which to use. Pressing SPEAKERS 1 or SPEAKERS 2 activates the respective set of speakers.
1 | 2 | To use the set of speakers connected to the FRONT SPEAKERS 1 terminals, press SPEAKERS 1 to set |
| SPEAKERS |
|
| it in the _ON position, and press SPEAKERS 2 to set it in the ÑOFF position. |
_ON ÑOFF | To use the set of speakers connected to the FRONT SPEAKERS 2 terminals, press SPEAKERS 2 to set |
it in the _ON position, and press SPEAKERS 1 to set it in the ÑOFF position.
To use both sets of speakers, press both SPEAKERS 1 and 2 to set them in the _ON position. To use neither set of speakers, press both SPEAKERS 1 and 2 to set them in the ÑOFF position.
Note:
When only one set of the front speakers is connected to either the FRONT SPEAKERS 1 or 2 terminals, do not press both SPEAKERS 1 and 2 to set them in the _ON position. If you do, no sound comes out of the front speakers.
Adjusting the Volume
MASTER VOLUME
–+
On the front panel
–VOLUME +
From the remote control
On the front panel:
To increase the volume, turn MASTER VOLUME clockwise.
To decrease the volume, turn it counterclockwise.
When you turn MASTER VOLUME rapidly, the volume level also changes rapidly. When you turn MASTER VOLUME slowly, the volume level also changes slowly.
From the remote control:
To increase the volume, press VOLUME +.
To decrease the volume, press VOLUME –.
CAUTION:
Always set the volume to the minimum before starting any source. If the volume is set at its high level, the sudden blast of sound energy can permanently damage your hearing and/or ruin your speakers.
Muting the Sound
From the remote control only:
Press MUTE to mute the sound through all speakers and headphones connected. “MUTE” appears on the display and the volume turns off.
MUTE
To restore the sound, press MUTE again so that “OFF” appears on the display.
Turn MASTER VOLUME or pressing VOLUME +/– also restores the sound at the previous volume level.
Page 11
