Basic Operations
The following operations are commonly used when you play any sound source.
Turning the Power On and Off (Standby)
| On the front panel: |
STANDBY | To turn on the power, press STANDBY/ON . |
| The STANDBY lamp goes off. The name of the current source (or station frequency) appears on the display. |
STANDBY/ON |
| L | R |
MUTE TUNED | SLEEP SEA | ||
AUTO STEREO PRO LOGIC 3CH LOGIC HALL | LOUDNESS | VOLUME | |
CH- |
|
| MHz |
|
| kHz | |
Current source name appears Current volume level is shown here
STANDBY | To turn off the power (into standby mode), press STANDBY/ON again. |
| |
| The STANDBY lamp lights up. |
STANDBY/ON | From the remote control: |
| |
| To turn on the power, press AUDIO. |
AUDIO | The STANDBY lamp goes off. The name of the current source (or station frequency) appears on the display. |
|
To turn off the power (into standby mode), press AUDIO again.
The STANDBY lamp lights up.
Note:
Pressing STANDBY/ON 
again turns off the power (into standby mode) and lights the STANDBY lamp.
A small amount of power is consumed in standby mode. To turn the power off completely, press 
POWER to set it in the ÑOFF position on the front panel.
Selecting the Source to Play
On the front panel:
SOURCE
1. Press SOURCE so that Control %/ Þbuttons work for selecting the source.
The lamp above the button lights up.
2. Press Control %/ Þuntil the source name you want appears on the display.
VOLUME
From the remote control:
CD | Press one of the source button directly. | |
| ||
TAPE | CD* | Listen to the CD player. |
| ||
| TAPE* | Listen to the cassette deck connected to the TAPE jacks. |
FM/AM | FM/AM* | Listen to an FM or AM (MW/LW) broadcast. |
| ||
| VCR | View the video component connected to the VCR jacks. |
VCR | VIDEO | View the video component connected to the VIDEO jacks. |
| PHONO* | Listen to a record. |
VIDEO |
|
|
Note:
*When you press one of the source buttons on the remote control marked above with an asterisk, the receiver automatically turns on.
PHONO
English
Page 10
