INITIAL SETUP
If your service provider or antenna installer has already installed your TV system to receive terrestrial TV
programmes, do not change any connections of those devices or installation settings unless it is absolutely necessary.
If your receiver has not been configured by your service provider or system installer, then it will not be set up for
any specific channel or frequency when powered on for the first time.
● Initial Screen –
The first time the receiver is powered on, it will
display a Country Selection menu.
● Use the arrow buttons “▲” and “▼” to highlight
your country o f residence and press the “ENTER”
button to make your selection.
● If the Initial Screen does not appear, press the
“MEN U” button for configuration.
Zinwell to-do:
Above is tentative description. Actual procedure to be confirmed by Zinwell. Also Zinwell should provide an updated
snapshot for country selection screen.
AUS SIN
Menu Navigation
MAIN MENU
There are two ways to enter the Main Menu when the receiver is powered on:
● On the remote control, press the “MENU” button.
● Alternatively, press “MENU” button on the front
panel.
Use the arrow buttons ▼▲ to navigate through the
menu, “ENTER” button to choose specific items, and
“EXIT” button to return to the main menu from
submenu or to leave the main menu.
17