Gateway HX2000 manual FAQs, Picture has shadows or “ghosts”, Color is not uniform, General

CHAPTER 1: Using Your Gateway Flat-Panel Monitor

Picture has shadows or “ghosts”

•Press (Auto) to automatically adjust the display image to the ideal settings.

•Remove any extension cables or switchboxes.

•Make sure that the video cable is connected securely to the back of the monitor and your computer. For more information about connecting the video cable, see “Connecting the monitor” on page 2.

•Make sure that the video cable is not damaged.

•Check the end of the video cable for any pins that might be bent or pushed in.

•Make sure that your monitor connection is using the VGA cable that came with your monitor.

Color is not uniform

•Press (Auto) to automatically adjust the display image to the ideal settings.

•Make sure that the monitor warms up for at least 30 minutes before making a final judgment about color uniformity or brightness.

Image is not sized or centered correctly

•Press (Auto) to automatically adjust the display image to the ideal settings.

•Use the position controls to adjust the image. For instructions on how to adjust the display image position, see “Adjusting monitor settings” on page 6.

The monitor has pixels that are always dark or too bright

•This condition is normal and inherent in the TFT technology used in active-matrix LCD screens. Gateway’s inspection standards keep these to a minimum. If you feel these pixels are unacceptably numerous or dense on your display, contact Gateway Customer Care to identify whether a repair or replacement is justified based on the number of pixels affected.

FAQs

This section contains answers to frequently asked questions.

General

I have the monitor connected to my notebook’s VGA port and I see no image on the screen.

You have two options:

•If your notebook supports dual displays, you can use both your notebook’s display and this monitor in extended desktop multi-monitor mode. See Windows Help to learn how to enable multiple monitors.

•You can also use this monitor as your primary monitor and not use the notebook’s screen. Notebook computers typically have an FN key combination that lets you toggle between your notebook’s display and an externally attached display. On Gateway notebooks, this key combination is FN+F4. The F4 key is located along the top row of keys. See your notebook user guide for more information.

12