Toshiba HD-XA2 Via component video input, Via S-VIDEO or Video yellow input, Connect either

Chapter2Connections

Connecting to a TV (Continued)

Via component video input

Component video cables (not supplied)

To COMPONENT OUTPUT

To use the digital output,		To use the analog sound output, connect these jacks
connect either of these
		to audio input jacks on your TV using the audio cable,
jacks to an audio input
		and set “Speaker Setting” (	page 56) to “2ch”.
on a device capable of
processing a Dolby
Digital, DTS bitstream
or PCM audio. (	page 25)

Finally connect the supplied power cord to a wall outlet.

This player supports simultaneous output of video on its HDMI and component video ports. However, some discs may restrict output of video on the component video ports when viewing high definition content or up-converted DVD content. The resolution on the HDMI output will be the same as the resolution output on the component video output. Thus, because the HDMI output can change automatically to match the maximum available resolution of your display, if you connect both the HDMI output and component output, the resolution on the component output will change if the HDMI output Auto-adjusts.

After completing the connection, proceed to page 23 to make the setting.

Via S-VIDEO or VIDEO (yellow) input

Connect either.

*	To VIDEO	To S-VIDEO
To use the analog sound
output, connect these jacks
to audio input jacks on your		S-VIDEO cable (not supplied)
TV using the audio cable,
and set “Speaker Setting”
( page 56) to “2ch”.

Audio/video cable (supplied)

*To use the digital output, connect either of these jacks to an audio

input on a device capable of processing a Dolby Digital, DTS bitstream or PCM audio. (page 25)

Finally connect the supplied power cord to a wall outlet.

480i output only regardless of the resolution settings or the connections of other output jack.

22

After completing the connection, proceed to page 23 to make the setting.