22
2
Chapter2Connections
Connecting to a TV (Continued)
Finally connect the supplied
power cord to a wall outlet.
Component video cables
(not supplied)
To COMPONENT OUTPUT
To use the analog sound output, connect these jacks
to audio input jacks on your TV using the audio cable,
and set “Speaker Setting” ( page 56) to “2ch”.
To use the digital output,
connect either of these
jacks to an audio input
on a device capable of
processing a Dolby
Digital, DTS bitstream
or PCM audio. ( page 25)
After completing the connection, proceed to page 23 to make the setting.
After completing the connection, proceed to page 23 to make the setting.
480i/576i output only regardless of the resolution
settings or the connections of other output jack.
Connect either.
Finally connect the supplied
power cord to a wall outlet.
Audio/video cable (supplied)
S-VIDEO cable (not supplied)
To use the analog sound
output, connect these jacks
to audio input jacks on your
TV using the audio cable, and
set “Speaker Setting”
( page 56) to “2ch”.
To S-VIDEO
To VIDEO
To use the digital output, connect
either of these jacks to an audio
input on a device capable of
processing a Dolby Digital, DTS
bitstream or PCM audio. ( page 25)
*
*
Via component video inputVia S-VIDEO or VIDEO (yellow) input