Toshiba HD-XE1KY 1st Dhcp setting, 2nd Proxy setting, 3rd NTP Server setting, Cookie setting

Internet connection setting procedure (Outline)

1st DHCP setting

•Set “DHCP” to “On”.

The network information is automatically set.

•Set “DNS” to “On”.

The DNS server is obtained automatically from the DHCP server.

1st DHCP setting

1Press SETUP button. “SETUP MENU” appears.

2Press / buttons to select “Ethernet”, then press OK button.

3On “Ethernet” menu, press / buttons to select “DHCP” then press OK button.

4 Set “DHCP” to “On”, then press OK button.

Introduction Connections

If a connection cannot be established even if “DHCP” is set to “On”.

•Set “DHCP” to “Off”.

Set “IP Address”, “Subnet Mask”, and “Gateway” manually.

•Set “DNS” to “Off”.

Set the DNS server address manually.

2nd Proxy setting

	DHCP
DHCP	On				Off
IP Address	0	.	0	.	0	.	0
Subnet Mask
	0	.	0	.	0	.	0
Gateway
	0	.	0	.	0	.	0
DNS
	On				Off
DNS Server
	0	.	0	.	0	.	0
	Confirm
	OK		Cancel

Skipped when “DHCP” is set to “On”.

(Basic)	Playback
(Advanced)	Playback

If the provider you are using requires a proxy setting to be configured, set the corresponding proxy server address.

3rd NTP Server setting

The player automatically accesses an internet server to adjust its clock via the network time protocol.

4th Network Speed setting

Select the speed according to the specification of your LAN.

5th

Cookie setting

Select whether you accept “cookies” or not.

5 Set “DNS” to “On”, then press OK button.

	DHCP
DHCP	On				Off
IP Address	0	.	0	.	0	.	0
Subnet Mask
	0	.	0	.	0	.	0
Gateway
	0	.	0	.	0	.	0
DNS
	On				Off
DNS Server
	0	.	0	.	0	.	0	Skipped when
								“DHCP” is set
	Confirm
								to “On”.
	OK		Cancel

6Select “Confirm”, then press OK button. Confirming starts.

If the setup is successful, an IP address appears. Press OK button.

If the setup is not successful:

a)Set “DHCP” to “Off” then press OK button.

b)Input the addresses into “IP Address”, “Subnet Mask” and “Gateway” using the number buttons.

IP Address	This sets a different address within
	the same subnet of the PC on your
	network.
	e.g.: If the IP address of the PC is
	192.168.1.10, set 192.168.1.15 (or
	some other unused address).
Subnet Mask	This sets the subnet mask of the
	network environment that will be
	connected.
	e.g.: 255.255.255.0
Gateway	This sets the gateway used by the
	player (e.g.: 192.168.1.1).

c)Set “DNS” to “Off” then press OK button.

d)Input the address into “DNS Server”.

This sets the DNS server to be used by the player. e.g.: 192.168.1.1

e)Press OK button.

Internet connection

Others

47