- 24 -
To set STOP TIME:
1. Enter the preset command to access the main menu.
Refer to section 6.1 for the controller model and preset command.
2. Position the cursor ( ) next to PAN/TILT SETUP and press the OPEN button to access the Pan/
Tilt menu.
3. Position the cursor next to STOP TIME and press the OPEN button to move the cursor to the
right.
4. Move the joystick up or down to set the stop time.
5. To accept the selection, press the OPEN button or to cancel the selection, press the CLOSE
button.
6.8.10MAX SPEED
The maximum speed of Pan/Tilt functions can be set from 30 degrees/sec to 400 degrees/sec. The
max speed controls global Pan/Tilt speeds. To reduce rotation noise use a lower speed.
Menu
<CAMERA SETUP>
<PAN/TILT SETUP>
<PRESET TITLES>
<OTHERS>
EXIT
MAIN MENU PAN/TILT MENU
AUTO FLIP ON
PROPORTIONALP/T ON
SCAN LIMIT STOPS OFF
MANUAL LIMIT STOPS OFF
PARK TIME MIN 0MIN
AUTO PATR O L P1 OFF
SCAN SPEED 5DEG./S
SCAN TILT ANGLE 30DEG.
STOP TIME 10SEC
MAX SPEED 400DEG/S
To set MAX SPEED:
1. Enter the preset command to access the main menu.
Refer to section 6.1 for the controller model and preset command.
2. Position the cursor ( ) next to PAN/TILT SETUP and press the OPEN button to access the Pan/
Tilt menu.
3. Position the cursor next to MAX SPEED and press the OPEN button to move the cursor to the
right.
4. Move the joystick up or down to set the maximum speed.
5. To accept the selection, press the OPEN button or to cancel the selection, press the CLOSE
button.