Toshiba IK-HD1D 䋨8䋩 Returning to factory settings, Output RGB, 䋨7䋮4䋩 Changing RGB Sync

Move up and down	Select the desired
by pushing	value by pushing
MENU UP,DOWN	DATA UP,DOWN
		OUTPUT Y/Pb/Pr, RGB
-- 7 OPTION	-- <FILE A>
OUTPUT	RGB	RGB SYNC G, ALL ON, ALL OFF
RGB SYNC	G	SHADING MANUAL Setting 128 to 127
SHADING	OFF
BAUD RATE	9600bps	RS232C baud rate 9600bps, 19200bps
OSD OUTPUT	ALL ON
		OSD OUTPUT ALL ON, Analog, Digital

䋨7䋮4䋩 Changing RGB SYNC

Move the “ ” to RGB SYNC by pushing [MENU UP], [MENU DOWN] buttons.

Select G, ALL ON or ALL OFF by pushing [DATA UP], [DATA DOWN] buttons.

* When Y/Pb/Pr is selected at OUTPUT, RGB SYNC change cannot be performed.

䋨7䋮5䋩 Changing RS232C baud rate

Move the “ ” to BAUD RATE by pushing [MENU UP], [MENU DOWN] buttons.

Select either 9600bps or 19200bps by pushing [DATA UP], [DATA DOWN] buttons.

䋨7䋮6䋩 Changing OSD OUTPUT mode

Move the"→" to OSD OUTPUT by pushing [MENU UP], [MENU DOWN] buttons. Select either ALL ON, Analog, or Digital by pushing [DATA UP], [DATA DOWN] buttons.

ALL ON can be performed in both the analog and digital monitor. If Analog is selected, it outputs only for analog.

If Digital is selected, it outputs only for digital.

Please select a mode depending on the type of the monitor display that is connected. If incorrect mode is selected, the display might disappear.

In that case, please cycle the power, and refer to section “7.2 (8) Returning to factory settings”.

䋨8䋩 Returning to factory settings

The contents set of each scene file can be returned to the factory default status (preset status).

(1)Select a scene file to set to the factory default status by [FILE] button.

(2)If the color bar pattern or characters are displayed on the screen, press the [DISP] button to disable the color bar pattern and character display.

(3)Push [MENU DOWN] and [DATA DOWN] buttons simultaneously for approx. 1 second.

(4)The preset operation starts. When the preset operation finishes, the character PRESET OK is displayed for approx. 1 second.

30