Toshiba IK-TF2 instruction manual Mode EXT Phase, RGB Sync, Baud Rate

￿5￿ SYNC

When an external sync signal is input, the display changes from INT (internal sync) to EXT (external sync)

automatically.

Move up and down		Set by pushing
By pushing		DATA UP,DOWN
MENU UP,DOWN
			￿Sync system display
-- 5 SYNC --
			￿H PHASE	-100 to 100
MODE		EXT
￿H PHASE	0		￿RGB SYNC	G, ALL ON, ALL OFF
RGB SYNC		G

￿5￿1￿ Adjusting horizontal phase

￿Set the “￿” to H PHASE by pushing [MENU UP], [MENU DOWN] buttons.

￿Adjust the horizontal phase by pushing [DATA UP], [DATA DOWN] buttons.

￿5￿2￿Changing RGB SYNC

￿Set the “￿” to RGB SYNC by pushing [MENU UP], [MENU DOWN] buttons.

￿Select G, ALL ON or ALL OFF by pushing [DATA UP], [DATA DOWN] buttons.

￿6￿ OPTION

Move up and down By pushing

MENU UP,DOWN

Set by pushing

DATA UP,DOWN

￿RS232C baud rate 9600bps, 19200bps

-- 6 OPTION --

￿BAUD RATE 9600bps

￿6￿1￿ Changing RS232C communication baud rate

￿Set the “￿” to BAUD RATE by pushing [MENU UP], [MENU DOWN] buttons.

￿Select either 9600bps or 19200bps by pushing [DATA UP], [DATA DOWN] buttons.

- 22 -