- 30 -

Symptom Items to be checked
No image Is the power supplied correctly?
Is the lens iris adjusted correctly?
Are the cables connected correctly?
Is the shutter mode set correctly?
Poor color Is the monitor (TV) adjusted correctly?

Is the white balance of the camera adjusted correctly?

Is the illumination dark?
Power supply DC12V10%
Power consumption Approx. 3.6W
Pick-up system RGB, 3CCD, Micro prism system
Image sensor 1/3inch ITCCD
(Effective pixels) Horizontal768pixels, Vertical494pixels
Scanning system 21 interlace
Scan frequency Horizontal15.734kHz, Vertical59.94Hz
Sync system Internal/External(Automatic switching)
Horizontal resolution 570TV lines
Sensitivity F8 standard2000 lx, 3000K
Minimum illumination 10 lxF2.2, Sensitivity18dB, 3000K
SN ratio 64dB standard (G)
Lens mount C mount(flange back17.526mm in-air)
Ambient temperature 32 to 104F (0 to 40)
Ambient humidity Less than 90%
Weight Approx. 5.47oz (155g)
External dimension
1.73”(W)1.73”(H)3.07”(D)
(44(W)44(H)78(D)mm) (except for protruded portion)
White balance AWBAutomatic white balance, MANUALManual
Gain MANUALManual, OFF0dB
Output signal RGB 75 unbalanced, D sub 15 pin connector
External sync input HD or VD 25V(pp) Negative
Sync signal output SYNC
HD, VD, INDEX
2.0V1V(pp) 75 unbalanced
5V V(pp) , Negative,
Load impedanceMore than 10k
External trigger input TRIGGER Low levelLess than 0.4V, High level3.45V
1 Pulse Positive/Negative/Width selectable
2 Pulse Positive/Negative/Width selectable
Interface Serial data interfaceRS-232C
Optional parts EXCTF05B(RGB cable), etc
ʜDesign and specifications are subject to change without notice.
+0.5
-1.0
9SPECIFICATIONS8BEFORE MAKING A SERVICE CALL