Custom Command
If Custom Camera (scanner) is selected as the PTZ driver, the Preset Position and PTZ Control Panel on the main page will be disabled. You will need to configure command buttons to control the PTZ scanner. Click Custom Command to open the Custom Command page to set the commands in the Control Settings session. Please refer to your PTZ scanner user's manual to enter the commands in the following fields. Click Save to enable the settings and click Close to exit the page.
NOTE
● If you select the PTZ driver, the Control Settings column will not be displayed.
● For all PTZ drivers, a total of five additional command buttons can be configured.
►The command buttons will be displayed on the main page:
1
81
