Toshiba IK-WB30A user manual Physical Description, Front Panel

Physical Description

Front Panel

CS Lens Mount Ring

Light Sensor Built-in Microphone

Back Panel

Audio Out

Status LED

Microphone In

SD/SDHC Card Slot

Ethernet 10/100 RJ45 Socket	Power Cord Socket
	Fixing Hole

Recessed Reset Button General I/O Terminal Block

External/Internal MIC Switch

General I/O Terminal Block

This Network Camera provides a general I/O terminal block which is used to connect external input / output devices. The pin definitions are described below.

Pin Name

112V DC Output

2 Digital Output

3 Digital Input

4Ground

5Power in 24V AC

6 Power in 24V AC

7 RS-485 +

8 RS-485 -

1 2 3 4 5 6 7 8

When you connect a wire, or when you disconnect it, please push this orange push-button.

NOTE

●Only when a power supply connects to a camera, 12V DC is outputted from 1-pin.

●When an AC adapter or PoE is connected, don’t supply AC24V from this terminal.

14