L300/L300D series
Time
The following table shows the approximate time required to fully charge a discharged battery.
Charging time (hours)Battery type | Power on | Power off |
|
|
|
Battery pack (3 cell) | 8 hours or more | 3 hours |
|
|
|
Battery pack (6 cell) | 8 hours or more | 3 hours |
|
|
|
Battery pack (9 cell) | 8 hours or more | 4 hours |
|
|
|
RTC battery | 24 hours | 24 hours |
|
|
|
The charging time when the computer is on is affected by ambient temperature, the temperature of the computer and how you use the computer. If you make heavy use of external devices, for example, the battery might scarcely charge at all during operation. Refer also to the section Maximizing battery operating time.
Battery charging notice
The battery may not charge right away under the following conditions:■The battery is extremely hot or cold. If the battery is extremely hot, it might not charge at all. Also, to ensure the battery charges to its full capacity, charge the battery at room temperature of 10° to 30°C (50° to 86°F).
■The battery is nearly completely discharged. Leave the AC adaptor connected for a few minutes and the battery should begin charging.
The Battery indicator may show a rapid decrease in battery operating time when you try to charge a battery under the following conditions:
■The battery has not been used for a long time.■The battery has completely discharged and been left in the computer for a long time.
■A cool battery is installed in a warm computer.In such case, follow the steps below.1.Fully discharge the battery by leaving it in the computer with the power on until the power automatically shuts off.
2.Plug in the AC adaptor.3.Charge the battery until the Battery indicator glows green.Repeat the steps two or three times until the battery recovers normal capacity.Leaving the AC adaptor connected will shorten battery life. At least once a month, run the computer on battery power until the battery is fully discharged, then recharged the battery.
User’s Manual |