L300/L300D series

3.Click the OK button. If the character string you enter matches the registered password, the password option is reset and the display changes to:

Not registered

If they do not match, the following message appears. You must repeat step 1.

Incorrect Password!!!

If you enter the password incorrectly three times in a row, the computer need to shut off.

You will not be able to access the password option in the HW Setup. In this case you must turn the power off and back on to retry the procedure.

4.Follow the same procedures described in the earlier section, How to set the password, to set a new user password.

Display

This tab lets you customize your computer’s display settings for either the internal LCD screen or for an external monitor.

Power On Display

Lets you set the display to be used when the computer is booted.

Auto-Selected

Selects an external monitor if one is connected,

 

otherwise, it selects the internal LCD display

 

(Default).

 

 

LCD + Analog RGB

Selects both the internal LCD and an external

 

monitor for simultaneous display.

CPU

Dynamic CPU Frequency Mode

This option lets you choose from the following settings:

Dynamically

CPU power consumption and clock speed

Switchable

automatic switching function is enabled. When

 

the computer is in use, CPU operation is

 

automatically switched when necessary.

 

(Default)

 

 

Always Low

CPU power consumption and clock speed

 

automatic switching function is disabled. The

 

CPU always runs at low power consumption and

 

low speed.

 

 

User’s Manual

7-3