L300/L300D series

Problem

Procedure

Some CD/DVDs run

The software or hardware configuration may be

correctly, but others

causing a problem. Make sure the hardware

do not

configuration matches your software’s needs.

 

Check the CD/DVD’s documentation.

 

Check the type of CD/DVD you are using. Refer

 

to Chapter 1, Introduction, for more information.

 

Check the region code on the DVD. It must

 

match that on the drive. Region codes are listed

 

in the Optical disc drive section in Chapter 2, The

 

Grand Tour.

Cannot write correctly

If you have trouble writing, make sure you are

 

observing the following precautions:

 

■ Use only media recommended by TOSHIBA

 

■ Do not use the mouse or keyboard during

 

writing.

 

■ Use only the software supplied with the

 

computer for recording.

 

■ Do not run or start other software during

 

writing.

 

■ Do not jar the computer during writing.

 

■ Do not connect/disconnect external devices

 

or install/remove internal cards during writing.

 

If problems persist, contact your dealer.

 

 

Diskette drive

Problem

Procedure

Drive does not

There may be a faulty cable connection. Check

operate

the connection to the computer and to the drive.

 

 

Some programs run

The software or hardware configuration may be

correctly but others

causing a problem. Make sure the hardware

do not

configuration matches your software needs.

 

 

You cannot access the

Try another diskette. If you can access the

external 3 1/2"

diskette, the original diskette (not the drive) is

diskette drive

probably causing the problem.

 

If problems persist, contact your dealer.

 

 

9-8

User’s Manual