4 Replacement Procedures 4.16 CCD Board and MIC
4.16 CCD Board and MIC Removing the CCD Board and MIC
Remove the FL inverter board according to the following procedures and Figure 4-31.
1. Remove the CCD module with CCD cable from display rear cover.
2. Disconnect the CCD cable from the CCD module connector.
CCDmodule CCDcable
MICcable
Displayrear cover
Figure 4-31 Removing the CCD board and MIC
3. Lift the MIC from the display rear cover.
4-52 Satellite L300/L305/ Satellite Pro L300/ EQUIUM L300/ SATEGO L300 Maintenance Manual