Release latch Switch handle | Cisco Systems M SFS7000E guide

Installing the Cisco M SFS7000E InfiniBand Switch

Step 4 Press the release latch upward so the switch handle springs open and is perpendicular to the module. (See Figure 5.)

Figure 5

Switch Handle in Open Position

M SFS7000E

1

2

TX/RX

TX/RX

TX/RX

TX/RX

TX/RX

TX/RX

TX/RX

250397 TX/RX

1

Release latch

2

Switch handle

Cisco M SFS7000E Installation Note: InfiniBand Blade Switch for the Dell Modular Server Chassis

	78-18371-01	9

Image 9

Cisco Systems M SFS7000E specifications Release latch Switch handle, Switch Handle in Open Position

Contents

Contents Safety Overview One warranty card Parts List Cisco M SFS7000E InfiniBand Switch Switch Description HCA Mezzanine Card HCA InfiniBand Port Bay Module Bays and HCA Expansion Cards Installing the Cisco M SFS7000E InfiniBand Switch Pre-installation Guidelines Chassis I/O Module Bays Connector Cover Switch Handle in Open Position Release latch Switch handle Inserting the Switch into the Server Chassis Removing the Cisco M SFS7000E InfiniBand Switch Connecting InfiniBand CablesInfiniBand Cable with Pinch Connector Removing Cable with a Pinch Connector InfiniBand Cable with Pull Connector Removing Cable with a Pull Connector LED Indicators on Switch External LED Specifications Switch Status Power LED Indicator InfiniBand Port Status LED IndicatorsSystem Status LED Indicator External Network Management Requirements Bewaar Deze Instructies Säilytä Nämä OhjeetConservez CES Informations Conservare Queste Istruzioni Bewahren SIE Diese Hinweise GUT AUFTA Vare PÅ Disse Instruksjonene Guarde Estas Instruções Spara Dessa Anvisningar GEM Disse Anvisninger Page Related Documentation