Manuals / Brands / Computer Equipment / Computer Hardware / Toshiba / Computer Equipment / Computer Hardware

Toshiba Boot Priority, Power On Display, Boot Priority Options, The Power On Display is supported with some models, Auto-Selected, System LCD Only

Models: L650D L640 L640D L645 L645D

1 198

Download 198 pages, 5.61 Mb

HW Setup

This tab lets you customize your computer’s display settings for either the internal display or an external monitor.

Power On Display

This tab allows you to select the display to be used when the computer is started. Please note that this setting is only available on standard VGA mode and is not available as part of the Windows Desktop properties.

The Power On Display is supported with some models.

Auto-SelectedSelects an external monitor if one is connected, otherwise, it selects the internal display (default).

System LCD Only Selects the internal LCD, even if an external monitor is connected.

Boot Priority

Boot Priority Options

This tab allows you to set the priority for booting the computer. The Boot Priority Options setting window will be displayed as shown below. Click the up and down arrow buttons to adjust the priority.

You can override the settings and manually select a boot device by pressing one of the following keys while the computer is booting:

User’s Manual

7-3

Contents

Page Table of Contents Preface General Precautions Chapter 1 Getting Started Chapter 2 The Grand Tour Chapter 3 Hardware, Utilities and Options Chapter 4 Operating Basics Chapter 5 The Keyboard Chapter 6 Power and Power-UpModes HW Setup Chapter 8 Troubleshooting Appendix A Specifications Appendix B Display Controller and Video mode Appendix C Wireless LAN Glossary Index Copyright Disclaimer Trademarks FCC information EU Declaration of Conformity Canadian regulatory information (Canada only) Modem warning notice Japan regulations Redial Black Listed Pursuant to FCC CFR 47, Part 68: Type of service Telephone company procedures If problems arise Disconnection Fax branding Use only No. 26AWG or larger modular cable Instructions for IC CS-03certified equipment Notes for Users in Australia and New Zealand c/ Automatic calls to different numbers shall be not less than 5 seconds apart ■The correct settings for use with this modem in New Zealand are as follows: ATB0 (CCITT operation) AT&G2 (1800 Hz guard tone) AT&P1 (Decadic dialing make-breakratio =33%/67%) ATS0=0 (not auto answer) ATS6=4 (Blind dial delay) General conditions An invoice for $NZ1237.50 will be sent under separate cover Following information is only valid for EU-memberStates: Disposing of the computer and the computer's batteries REACH - Compliance Statement Following information is only for Turkey: Optical disc drive safety instructions ■DVD Super Multi with Double Layer Recording DV-W28S ■DVD Super Multi UJ890 ■BD-ComboUJ141 ■BD-WriterUJ240 ■DVD Super Multi GT30N/GT30F ■DVD Super Multi TS-L633C/TS-L633Y Precautions Preface Conventions Icons Keys ENTER Key operation CTRL Terminology HDD or Hard disk drive General Precautions Provide adequate ventilation Creating a computer-friendlyenvironment Stress injury Heat injury Pressure or impact damage Mobile phones Instruction Manual for Safety and Comfort Getting Started Equipment checklist Getting Started ■Restoring the pre-installedsoftware from the Recovery hard disk drive ■Restoring the pre-installedsoftware from your created Recovery Media ■Use a virus-checkprogram and make sure it is updated regularly Connecting the AC adaptor ■Do not use a 3-pinto 2-pinconversion plug Battery DC IN Opening the display The display panel can be opened to a wide range of angles for optimal viewing ■Do not press or push on the display panel ■Do not lift the computer by the display panel Turning on the power Power ■Volume cannot be adjusted during Windows Setup 1.Open the display panel 2.Press and hold the computer’s power button for two or three seconds Shut Down Mode Sleep Mode Benefits of Sleep Mode Executing Sleep Mode Sleep Mode limitations Hibernation Mode Benefits of Hibernation Mode Starting Hibernation Mode Automatic Hibernation Mode Data save in Hibernation Mode System Recovery Options System Recovery ■Be sure to connect the AC adaptor when you create Recovery Media Be sure to close all other software programs except the Recovery Media Creator ■Operate the computer at full power ■Do not use power-savingfeatures ■Do not use on an unstable surface such as a stand Restoring the pre-installedsoftware from the Recovery hard disk drive When the sound mute feature has been activated by pressing the ESC 1.Turn off your computer 2.While holding down 0 (zero) key on the keyboard, turn on your computer 1.Load the Recovery Media into the computer and turn off the computer's power The Grand Tour Legal Footnote (Non-applicableIcons) Front with the display closed Left side ■Connect the built-inmodem only to ordinary analog phone lines ■Never connect the built-inmodem to a digital line (ISDN) The cooling vents help keep the processor from overheating LAN jack Right side Back Underside Front with the display open Microphone Web Camera LED Web Camera such as Windows Live Messenger. TOSHIBA Web Camera Application will help you to add Touch Pad Touch Pad control buttons Bluetooth antenna Power button Indicators Optical disc drives CDs DVDs BDs BD-Combodrive DVD Super Multi drive AC adaptor Hardware, Utilities and Options Hardware Processor Legal Footnote (CPU) Memory Legal Footnote (Memory (Main System)) Power Legal Footnote (Battery Life) Disks Legal Footnote (Hard Disk Drive (HDD) Capacity) Optical disc drive Legal Footnote (LCD) Legal Footnote (Graphics Processor Unit ("GPU")) Sound Multimedia Communications Legal Footnote (Wireless LAN) Special features System automatic Sleep/Hibernation Mode *1 Power on password Two levels of password security, supervisor and user, are available to prevent unauthorized access to your computer Instant security A specific hot key function automatically locks the Utilities and Applications TOSHIBA Power Saver TOSHIBA Zooming Utility TOSHIBA PC This software is provided for playback of DVD PLAYER Video Start -> All Programs -> TOSHIBA DVD PLAYER -> TOSHIBA DVD PLAYER WinDVD BD for Corel -> Corel WinDVD BD TOSHIBA HDD/SSD Alert Utility -> TOSHIBA -> Utilities -> HDD SSD Alert Page TOSHIBA eco Utility All Programs -> TOSHIBA -> Utilities -> eco Utility TOSHIBA Bulletin Board Optional devices Cards/memory Peripheral devices Other Bridge media slot Points to note about the SD/SDHC/SDXC memory card Memory media format Formatting an SD/SDHC/SDXC memory card Card care Memory card care About the write-protect 3. Press the memory media gently to ensure a firm connection is made Removing a memory media 1.Open the Safely Remove Hardware and Eject Media icon on the Windows Taskbar Open the icon on the Windows Taskbar 2.Point to memory media and click the left Touch Pad control button Additional memory module You can access the inserted memory modules efficiently in dual channel ■Use a point size 0 Phillips screwdriver to remove and fasten the screws -the use of an incorrect screwdriver can damage the screw heads ■Use only memory modules approved by TOSHIBA Installing a memory module 8.Seat the memory module cover in place and secure it with three screws Take care to ensure that the memory module cover is firmly closed Removing a memory module Page Connecting the monitor cable Connecting the eSATA device Disconnecting an eSATA device Connecting the HDMI out port Settings for display video on HDMI Select HD Format Connecting the security lock Optional accessories Operating Basics Using the Touch Pad Web Camera Using the TOSHIBA Face Recognition Page 1:N Mode Login screen 1:1 Mode Login screen Using optical disc drives Loading discs Removing discs To remove the disc, follow the steps as detailed below: Writing CD/DVD/BDs Some models in this series are equipped with a ■CD-R/RWmedia cannot be accessed using the burn cd/dvd option in Media Center To write data to TOSHIBA Disc Creator Important message Before writing or rewriting with the BD-Writerdrive CD-R: TAIYO YUDEN CO., Ltd MITSUBISHI KAGAKU MEDIA CO., LTD Hitachi Maxell,Ltd Page Before writing or rewriting with the BD-Combodrive Before writing or rewriting with the DVD Super Multi drive TAIYO YUDEN Co.,Ltd. (for 8x and 16x speed media) MITSUBISHI KAGAKU MEDIA CO.,LTD. (for 8x and 16x speed media) Hitachi Maxell,Ltd. (for 8x and 16x speed media) Page When writing or rewriting Always copy data from the hard disk drive to the optical media - do not use the ■Do not perform any of the following actions: ■Change users in the Operating System ■Start a communication application TOSHIBA Disc Creator ■DVD-Videocannot be created using TOSHIBA Disc Creator ■DVD Audio cannot be created using TOSHIBA Disc Creator You cannot use TOSHIBA Disc Creator's "Audio CD" function to record music to Do not use the "Disc Backup" function of TOSHIBA Disc Creator in order to copy Data Verification How to learn more about TOSHIBA Disc Creator How to make a Labelflash DVD How to make a DVD-Video How to make a Blu-rayDisc Movie How to learn more about Corel DVD MovieFactory Important information for use TOSHIBA DVD PLAYER Windows logo Display Devices & Audio Starting TOSHIBA DVD PLAYER Using WinDVD BD for TOSHIBA Starting WinDVD BD for TOSHIBA Media care Sound System Starting SmartAudio Application Opening SmartAudio Help Dolby Advanced Audio Dolby Advanced Audio includes: High-Frequency ■Natural Bass: Extends the bass response of any speakers by up to an octave ■Dolby Headphone: Enables personal surround sound using any set of headphones Modem 5.Click OK in the Phone and Modem window Connecting the modular cable To connect the modem's modular cable, follow the steps as detailed below: 1.Plug the end of the modular cable into the computer's modem jack 2.Plug the other end of the modular cable into a telephone jack Do not pull on the cable or move the computer while the cable is connected Wireless communications Setting Security Worldwide operation Radio links Bluetooth Stack for Windows by TOSHIBA Release Notes related to the Bluetooth Stack for Windows by TOSHIBA Product Support: LAN Connecting the LAN cable Computer Handling Heat dispersal The Keyboard Typewriter keys Function keys: F1 … F12 Soft keys: FN key combinations Hot keys Output: Pressing FN + F5 changes the active display device Brightness Down Brightness Up Wireless: Pressing FN + F8 switches the active wireless devices If no wireless communication device is installed, no dialog box will appear Windows special keys Keypad overlay Arrow Mode Numeric Mode Generating ASCII characters Power and Power-UpModes Power conditions Monitoring of power condition Battery Battery pack Real Time Clock (RTC) battery Procedures Time Battery charging notice Maximizing battery operating time ■Processor speed ■Screen brightness ■System Sleep Mode ■System Hibernation Mode Removing the battery pack Installing the battery pack Password Utility Starting the computer by password Power-upmodes Panel power on/off System automatic Sleep/Hibernation HW Setup Accessing HW Setup HW Setup window General Setup Password User Password Owner String Boot Priority Boot Priority Options Boot Speed Keyboard Wake-upon Keyboard LAN Wake-upon LAN Built-inLAN USB Legacy USB Support SATA eSATA SATA Interface setting Troubleshooting Problem solving process Analyzing the problem Hardware and system checklist Overheating power down AC power Battery Power saver Select a power plan in the Power Options Real Time Clock Internal display panel Hard disk drive Page BD drive Check the type of CD/DVD/BD you are using The drive supports: BD-Writer/BD-Combo:BD-ROM, BD-ROMDL BD-R, BD-RDL, BD-RE, BD-RE Memory Cards: SD/SDHC/SDXC Card, Memory Stick/Memory Stick PRO, MultiMediaCard Memory Card error Remove the Memory Card from the computer occurs and then reinsert it in order to ensure it is firmly Touch Pad USB mouse USB device Legacy USB Support option within the eSATA device Sound system Modem CONNECT CARRIER LAN Bluetooth HDMI monitor output function TOSHIBA support Where to write Outside of Europe In Europe Australia Germany & Austria Specifications Physical Dimensions Environmental Requirements Power Requirements Data transmission and reception speed 600 bps Data reception only with 56000 bps Display Controller and Video mode Display controller Video mode Wireless LAN Card Specifications Radio Characteristics Supported Frequency Sub-bands 5GHz Band Channels Sets (Wireless IEEE 802.11 Revision a and n) 5170*2 5180*2 5190*2 5200*2 1615805*2 1655825*2 Bluetooth wireless technology Interoperability Please visit the following TOSHIBA PC product support website TOSHIBA PC product support website. In Europe visit http://www.pc.support.global.toshiba.com Bluetooth wireless technology and your Health Regulatory statements USA-FederalCommunications Commission (FCC) ■Reorient or relocate the receiving antenna ■Increase the distance between the equipment and the receiver Caution: Exposure to Radio Frequency Radiation Taiwan Using Bluetooth Adaptor from TOSHIBA equipment in Japan 1. Sticker Please put the following sticker on computer incorporating this product Device Authorization AC Power Cord and Connectors Europe: Denmark: Norway: Finland: Sweden: France: TOSHIBA PC Health Monitor Starting the TOSHIBA PC Health Monitor If a TOSHIBA PC Health Monitor message is displayed Legal Footnotes Non-applicableIcons CPU Memory (Main System) Battery Life Hard Disk Drive (HDD) Capacity LCD Graphics Processor Unit ("GPU") Wireless LAN Copy Protection Glossary HDD: HDMI: IDE: IEEE: I/O: Index