Toshiba LAN, CONNECT, CARRIER

		Troubleshooting
	Problem	Procedure
	After making a call you	Ensure that the communication application's tone
	can’t hear a ring	or pule dialling selection feature is set correctly.
	Communication is cut	The computer will automatically cut off
	off unexpectedly	communication when connection with the carrier
		is not successful for a set time interval - try
		lengthening this time interval within your
		communication application.
	A CONNECT display is	Ensure that the communication application's
	quickly replaced by NO	error control feature is set correctly.
	CARRIER
	Character display	When transmitting data you should ensure that
	becomes garbled	the parity bit and stop bit settings correspond
	during a	with those of the remote computer - you should
	communication	check the flow control and communication
		protocol settings within your communication
		application.
	You cannot receive an	Ensure that the communication application's
	incoming call	rings before auto answer feature is set correctly.
		If you are still unable to resolve the problem,
		contact your reseller, dealer or service provider.
LAN
	Problem	Procedure
	Cannot access LAN	Check for a firm cable connection between the
		LAN jack and the LAN hub.
	Wake-up on LAN does	Make sure the AC adaptor is connected. The
	not work	Wake-up on LAN function consumes power even
		when the system is off.
		If problems persist, consult your LAN
		administrator.

User’s Manual 8-18