English

 

Picture Mode

 

(Presentation)

 

Reference

 

Mode

 

(Dynamic)

 

Brightness

 

(50)

 

Contrast

 

(0)

2.

Color

PICTURE

(0)

Tint

menu

(0)

Sharpness

 

 

(15)

 

Brilliant Color

 

(On)

 

Color

 

Temperature

 

3D Color

 

Management

 

Save Settings

 

Quick Auto

.3Search

SOURCE menu

(On)

Color Space

 

Conversion (Auto detect by HDMI source)

Pre-defined picture modes are provided so you can optimize your projector image set-up to suit your program type. See "Selecting a picture mode" on page 36 for details.

Selects a picture mode that most suits your need for the image quality and further fine-tune the image based on the selections listed on the same page below. See "Setting the User 1/User 2 mode" on page 37 for details.

Adjusts the brightness of the image. See "Adjusting Brightness" on page 37 for details.

Adjusts the degree of difference between dark and light in the image. See "Adjusting Contrast" on page 37 for details.

Adjusts the color saturation level -- the amount of each color in a video image. See "Adjusting Color" on page 38 for details.

The function is only available when Video or S-Video with NTSC system is selected.

Adjusts the red and green color tones of the image. See "Adjusting Tint" on page 38 for details.

The function is only available when Video or S-Video with NTSC system is selected.

Adjusts the image to make it look sharper or softer. See "Adjusting Sharpness" on page 38 for details.

The function is only available when Video or S-Video with NTSC system is selected.

Adjusts white peaking while maintaining correct color presentation. See "Adjusting Brilliant Color" on page 38 for details.

See "Selecting a Color Temperature" on page 38 for details.

See "3D Color Management" on page 39 for details.

Saves the settings made for User 1 or User 2 mode.

See "Switching input signal" on page 30 for details.

Only action for HDMI Input source.

54 Operation

Page 54
Image 54
BenQ MP670 user manual Color Space, Dynamic