BenQ MP670 Replacing the remote control battery, English, Avoid excessive heat and humidity

Replacing the remote control battery

1.Press the release in the direction of the arrow.

2.Remove the battery by pulling the tray out

in the direction of the arrow.

2

1

3.	Insert the supplied batteries taking note of
	the polarity (+/-) as shown here.

English

CR20253VOL

T

S

4.Replace the tray.

SCR2025

T

V3

•Before using the remote control for the first time, remove the transparent insulation tape.

•Avoid excessive heat and humidity.

•There may be battery damage if the battery is incorrectly replaced.

•Replace only with the same or equivalent type recommended by the battery manufacturer.

•Dispose of the used battery according to the battery manufacturer’s instructions.

•Never throw a battery into a fire. There may be danger of an explosion.

•If the battery is dead or if you will not be using the remote control for a long time, remove the battery to prevent damage to the remote control from possible battery leakage.

Introduction 13