BenQ MP670 user manual Controls and functions, Projector

English

Controls and functions

Projector

1			8
2			9
3			10
			11
POWER	TEMP	LAMP
4			12
			13
5
6			14

7

1.POWER indicator light

Lights up or flashes when the projector is under operation. See "Indicators" on page 64 for details.

2.MENU/EXIT

Turns on the On-Screen Display (OSD) menu. Goes back to previous OSD menu, exits and saves menu settings.

See "Using the menus" on page 26 for details.

3. Left/

Starts the FAQ function. See "Utilizing FAQ function" on page 42 for details.

4.POWER

Toggles the projector between standby mode and on.

See "Starting up the projector" on page 25 and "Shutting down the projector" on page 49 for details.

5.MODE/ENTER

Selects an available picture setup mode. See "Selecting a picture mode" on page 36 for details.

Enacts the selected On-Screen Display (OSD) menu item. See "Using the menus" on page 26 for details.

6.BLANK

Used to hide the screen picture. See "Hiding the image" on page 41 for details.

7.Keystone/Arrow keys ( / Down) Manually corrects distorted images resulting from an angled projection. See "Correcting keystone" on page 32 for details.

8.FOCUS/ZOOM Ring

Used to adjust the projected image appearance. See "Fine-tuning the image size and clarity" on page 32 for details.

9.TEMPerature indicator light

Lights up red if the projector's temperature becomes too high. See "Indicators" on page 64 for details.

10.Keystone/Arrow keys ( / Up) Manually corrects distorted images resulting from an angled projection. See "Correcting keystone" on page 32 for details.

11.LAMP indicator light

Indicates the status of the lamp. Lights up or flashes when the lamp has developed a problem. See "Indicators" on page 64 for details.

12.AUTO

Automatically determines the best picture timings for the displayed image. See "Auto- adjusting the image" on page 31 for details.

13. Right/

Activates panel key lock. See "Locking control keys" on page 42 for details.

When the On-Screen Display (OSD)

menu is activated, the #3, #7, #10, and #13 keys are used as directional arrows to select the desired menu items and to make adjustments. See "Using the menus" on page 26 for details.

14.SOURCE

Displays the source selection bar. See "Switching input signal" on page 30 for details.

10 Introduction