English
If you are in a non-DHCP environment:
1.Repeat steps
2.Projector will restore the latest IP configuration into Lan Control Settings. (*1)
Network
Network State | Disconnect |
DHCP | Off |
Projector IP Address | 0.0.0.0 |
Subnet Mask | 0.0.0.0 |
Dedault Gateway | 0.0.0.0 |
DNS | 0.0.0.0 |
Apply |
|
MENU Back
3.Press 
to highlight DHCP and press 
/ 
to select Off.
4.Contact your ITS administrator for information on the Projector IP Address, Subnet Mask, Default Gateway, and DNS Server settings.
5.Press 
to select the item you want to modify and press MODE/ENTER.
6.Press 
/ 
to move the cursor and the press 
/ 
to enter the value.
7.To save the settings, press MODE/ENTER. If you do not want to save the settings, press MENU/EXIT.
8.Press 
to highlight Apply and press MODE/ENTER.
*1: If
Controlling the projector remotely through a web browser
Once you have the correct IP address for the projector and the projector is on or in standby mode, you can use any computer that is on the same local area network to control the projector.
1.Enter the address of the projector in the address bar of your browser and click GO.
2.The remote network operation page opens. This page allows you to operate the projector as if you were using the remote control or control panel on the projector.
i
ii | i |
|
i
46 Operation
