BenQ MP670 user manual Remote control effective range, Source, Up/ Down, Timer On/Set up

English

13. /

Right cursor:

Navigates and changes settings in the OSD. See "Using the menus" on page 26 for details.

:

Activates panel key lock. See "Locking control keys" on page 42 for details.

When the On-Screen Display (OSD) menu is activated, the #5, #7, #10, and #13 keys are used as directional arrows to select the desired menu items and to make adjustments. See "Using the menus" on page 26 for details.

14.Source

Displays the source selection bar. See "Switching input signal" on page 30 for details.

15.Page Up/ Down

Page up or down arrow when connected through USB to a PC. See "Remote paging operations" on page 41 for details.

16.Timer On/Set up

Turns on/off the Presentation Timer.

Changes settings in the Presentation Timer menu.

Remote control effective range

Infra-Red (IR) remote control sensor is located on the front and the rear of the projector. The remote control must be held at an angle within 30 degrees perpendicular to the projector's IR remote control sensor to function correctly. The distance between the remote control and the sensor should not exceed 7 meters (~ 23 feet).

Make sure that there are no obstacles between the remote control and the IR sensor on the projector that might obstruct the infra-red beam.

Approx.±15°

Approx.±15°

12 Introduction