BenQ MP670 Remote control, English, IR transmitter, Power, Menu/Exit, Blank, Digital Zoom +, Auto

Remote control

1
2	10
3	11
4
5	12
	13
64	14
7
8	15
9	16

1.IR transmitter

Tranmits signal to projector.

2. POWER

Toggles the projector between standby mode and on. See "Starting up the projector" on page 25 and "Shutting down the projector" on page 49 for details.

3.Menu/Exit

Turns on the On-Screen Display (OSD) menu. Goes back to previous OSD menu, exits and saves menu settings.

See "Using the menus" on page 26 for details.

4.

Freeze/unfreezes the video. See "Freezing the image" on page 42 for details.

5. /

Left cursor:

Navigates and changes settings in the OSD. See "Using the menus" on page 26 for details.

:

Starts the FAQ function. See "Utilizing FAQ function" on page 42 for details.

6.Blank

Hides the screen picture. See "Remote paging operations" on page 41 for details.

7./

Down cursor:

Navigates and changes settings in the OSD. See "Using the menus" on page 26 for details.

KEYSTONE key:

Manually corrects distorted images resulting from an angled projection. See "Correcting keystone" on page 32 for details.

8.Digital Zoom +/-

ZOOM in or out.

9.Volume +/-

Adjusts volume. See "Adjusting the sound level" on page 44 for details.

10. /

Up cursor:

Navigates and changes settings in the OSD. See "Using the menus" on page 26 for details.

KEYSTONE key:

Manually corrects distorted images resulting from an angled projection. See "Correcting keystone" on page 32 for details.

11.Auto

Automatically determines the best picture timings for the displayed image. See "Auto-adjusting the image" on page 31 for details.

12.Mode/Enter

Selects an available picture setup mode. See "Selecting a picture mode" on page 36 for details.

Enacts the selected On-Screen Display (OSD) menu item. See "Using the menus" on page 26 for details.

English

Introduction 11