4.11 Display Assembly 4 Replacement Procedures
M2 5x6 black flat head screw.
Wireless LAN antenna
LCD cableCN3000
Figure 4-14 Removing the display assembly
Installing the Display Assembly
Install the display assembly according to the following procedures and Figures 4-14.
1. Place the display panel in the correct position and push the wireless antenna cable
into the bottom cover.
2. Connect the LCD cable to CN3000 on the system board.
3. Secure the display assembly with four M2.5x6 black flat head screws
Satellite/Satellite Pro/L650 Maintenance Manual 4-31