2 Troubleshooting 2.6 SSD
Procedure 1 Test Program Check
Run the Storage test program stored on the maintenance test program disk for all test items.
See Chapter 3 for details on how to use the test program.
If an error is detected during the SSD test, an error code and status will be displayed. The
error codes and their status names are listed in Table 2-2. If an error code is not generated
and the problem still exists, go to Procedure 2.
Table 2- 2 SSD Error Code and Status
Code Status
1 Get Parameter Fail !
Read Old Data Error2
Write Pattern Error3
Read Back Data Error4
Data Compare Error5
6 Restore Data Erro
r
7 Read Verify Error
Seek Error
9
10 Disk Controller Self Test Failed
11 Disk Controller Test unexpected interrupt Failed
Disk Controller action Test Failed12
13 Disk dos not support SMART
Disk read attribute threshold erro
r
14
15 Disk read attribute value error
Disk SMART attribute value error16
2-16 Satellite/Satellite Pro/L650/L655 Maintenance Manual