HW Setup

The Wake-up on LAN function consumes power even when the system is off. Leave the AC adaptor connected while using this feature.

Regarding Wake-up on LAN from sleep or hibernation, you must check the "Allow the device to wake the computer" check box within the LAN Device properties. (This feature does not effect the Wake-up on LAN from sleep or hibernation.)

Power will be automatically turned on when a signal is received from an administrator's computer which is connected via a network.

The following settings can be changed when the Built-in LAN is Enabled.

Connect the AC adaptor when using the Wake-up on LAN function. The battery retention time will be shorter than the times listed in this manual when this function is enabled. Refer to the section Battery exhaused time in chapter 6.

Enabled

Enables Wake-up on LAN from shutdown.

Disabled

Disables Wake-up on LAN from shutdown.

 

(Default)

Built-in LAN

This feature enables or disables the Built-in LAN.

Enabled

Enables Built-in LAN functions (Default).

Disabled

Disables Built-in LAN functions.

USB

Legacy USB Support

Use this option to enable or disable USB Legacy Emulation. If your operating system does not support USB, you can still use a USB mouse and keyboard by setting the Legacy USB Support item to enabled.

Enabled

Enables the USB Legacy Emulation (Default).

Disabled

Disables the USB Legacy Emulation.

SATA

SATA Interface setting

This feature allows you to set SATA interface setting.

Performance

Let HDD/SSD work with maximum performance.

 

(Default)

Battery life

Let HDD/SSD work with battery life mode. If this

 

setting is selected, this caused performance

 

down.

 

 

User’s Manual

7-5