C870/C870D/L870/L870D/L875/L875D

Disabled

Disables the internal USB 3.0 controller.

LAN

Wake-up on LAN

This feature lets the computer's power be turned on from shutdown when it receives a wake-up packet (Magic packet) from the LAN.

The Wake-up on LAN function consumes power even when the system is off. Leave the AC adaptor connected while using this feature.

Regarding Wake-up on LAN from sleep or hibernation, you must check the "Allow the device to wake the computer" check box within the LAN Device properties. (This feature does not effect the Wake-up on LAN from sleep or hibernation.)

Power will be automatically turned on when a signal is received from an administrator's computer which is connected via a network.

The following settings can be changed when the Built-in LAN is Enabled.

Connect the AC adaptor when using the Wake-up on LAN function. The battery retention time will be shorter than the times listed in this manual when this function is enabled.

Enabled

Enables Wake-up on LAN from shutdown.

Disabled

Disables Wake-up on LAN from shutdown.

 

(Default)

Built-in LAN

This feature enables or disables the Built-in LAN.

Enabled

Enables Built-in LAN functions. (Default)

Disabled

Disables Built-in LAN functions.

 

 

SATA

This feature allows you to set conditions for SATA.

SATA Interface setting

This feature allows you to set SATA interface setting.

Performance

Let HDD/SSD work with maximum performance.

 

(Default)

Battery life

Let HDD/SSD work with battery life mode. If this

 

setting is selected, this caused performance

 

down.

User's Manual

4-14