![](/images/new-backgrounds/1184363/18436315x1.webp)
LQ500
Ordering Information
When ordering the LQ500, refer to Table 4. Type Specification Code. An entry must be made for each of the columns.
The following items must also be specified:
1.Fluid characteristics:
•Type of material to be measured
•Density (consistency) (max., normal, min.)
•Temperature (max., normal, min.)
•Pressure (max., normal, min.)
•Conductivity (max., normal)
2.Measurement range
3.Tag number (specify “None” if not needed)
4.
5.Other specific items
No.